Offizieller Reseller in Deutschland  ! SX OS/PRO/Core/Lite sind Jetzt Auf Lager ! 


How to install SX OS on your Switch via PC

Since sx pro & sx os are released by Team Xecuter, there are different  ways to install and activate the license inside the sx pro & sx os. You can install sx os via sx pro, pc, mobile phone. Today we talk about how to install sx os on your Switch via PC.

Difference between SX PRO and SX OS

The SX Pro is a USB-C dongle that is a plug-and-play solution for injecting the necessary payload to the RCM to boot into custom firmware. It comes with an SX OS license linked to your console and stored on your microSD card. SX Pro dongle can be used on several Nintendo Switch consoles, but each console must have an SX OS license to play the Switch backups. Without the SX Pro dongle, you'll need a PC + USB-C or Android + OTG cable to inject the payload into your switch every time you reboot. Once you have the SX Pro dongle, this process will become easy and portable. 

Offcial sx pro using guide manual[EN]_SX_Pro_v1.3.pdf

Xecuter Sx pro simple using steps:

1. Download the latest version of SX OS and extract this to your microSD card. Your card microSD can be formatted as FAT32 or exFAT.
2. Insert SX Pro dongle and tool into your Nintendo Switch. The dongle goes in the charger port, the tool in the right joycon rail.
3. Hold volume-up and press the power button, SX OS should start.
You can remove the dongle and tool once SX OS starts.
4. Enter the "album viewer" from the main menu and click on "license" to activate your SX OS License to enjoy all features
5. Enjoy the latest games and homebrew!

The SX OS is simply the custom firmware itsel, it is only a acticate code. In order to play game saves, you must activate it with a verified license against the Team Executer servers. The activation process can be done online via your Switch or offline with a PC. If SX OS is not enabled, it can only be used to play Switch homebrew.

How to install SX OS
1st Step
Have your Switch completely or almost fully charged.
Set your Nintendo Switch in airplane mode. (Or Wifi Logout)
Turn off the Nintendo Switch and remove any micro-SD card.
Download the latest copy of SXOS from
Note: You must have an SX OS license code to play backup games.

2nd step
Copy the Switch OS file (boot.dat) to the root of your MicroSD card.
Put the card back in your Nintendo Switch and leave it off.
While holding down "Volume +", press the power button. Nothing should now appear on your screen, the Nintendo Switch is now in RCM mode.
You need Jig to access RCM mode

3rd Step
Run the TegraRCMGui on your PC.
Go to the Settings tab and press the "install driver" button and allow the installation. (This will install the RCM Switch driver on your PC.)
Return now to the Payload tab and connect your Nintendo Switch, which should be in RCM mode, to your PC with a USB-C cable.
Select the folder icon in TegraRCM Gui and navigate to the SX OS file (payload.bin).

Choose the Inject Payload button and your Nintendo Switch must boot into SX OS.

On macOS, you can simply use the Web-based Rocket Launcher with Google Chrome. Do not try with any other browser because they do not support the necessary USB driver.

I recommend using a USB-C to USB-C cable with your Mac for this purpose. I also do not recommend using a hub- it's better to connect directly to your Mac without a hub.

Select the payload.bin file you downloaded and click "Do what you do!" If the Xecuter logo does not appear on the switch screen, try unplugging and reinserting the USB-C cable in Nintendo Switch, then press the Make it button! Again.

Note that this should also work in Linux.

Enable SX OS

Click Start Custom Firmware on your Nintnedo Switch. When you first start SX OS, a license file (license-request.dat) is created on your MicroSD cards.

After booting, turn off your Nintendo Switch and replace your MicroSD card on your PC.

Return Team Xecuters, download your file from the MicroSD file (license-request.dat) and manually enter your license code.
Click Recover License and the download of your new license file should begin.
Copy the license.dat file to the root of your MicroSD card.
Insert the card into your Nintendo Switch.
Now you have to put Nintendo Switch back into RCM mode and return the TegroRcmGui payload.bin file. (Step 3.)
The SX OS should now automatically recognize the license and start Switch SX OS.

<< True Blue Mini Ultradrive Pack for Genesis/Megadrive Mini(813 Games)

>> What you need to know before buying R4 card for Nintendo 3DS?


Get all the latest information on Events, Sales and Offers. Sign up for newsletter today.